Mostrando todos los resultados 12
-
STEELS FOR PLASTIC MOLDS: AISI P20 + Ni / DIN STEEL - EN 40CrMnNiMo8-6-4 / 1.2738
- Steel for plastic molds, pre-treated, tempered, good machinability, it is applicable for the plastic industry with deep engraving and high strength in the core, it is applied for large size molds, injection molds and extrusion molds for thermoplastics.
STEEL AISI P20 + NI
VER PRODUCTO -
STAINLESS STEELS: STEEL ASTM 304 / DIN - EN 1.4301 / X5CrNi18-10
- Austenitic stainless steel alloyed to chromium - nickel, resistant to corrosion and intergranular at temperatures above 300 ºC, with good weldability without requiring a subsequent heat treatment, with good resistance to corrosion produced by acids and alkaline solutions.
- To improve their resistance, the surfaces must be polished. Ideal for architectural use, household utensils, medical equipment, automotive industry, healthcare equipment, cutlery industry.
STEEL ASTM 304
VER PRODUCTO -
STAINLESS STEELS: ASTM 316L / DIN- EN 1.4404 / X2CrNiMo17-12-2 STEEL
- Austenitic stainless steel alloyed to chromium-nickel-molybdenum with low carbon content, resistant to intergranular corrosion at temperatures above 400ºC.
- Resistant to attack by acids such as dilute sulfuric acid and hydrochloric acid. For optimum resistance the surface must be polished. Good cold forming properties, can be given mirror finish surface, good weldability.
- For use in the dye, wood pulp, cellulose, chemical, dairy and textile industries.
STEEL ASTM 316L
VER PRODUCTO -
STEEL OF MECHANICAL CONSTRUCTION: STEEL ASTM 4140 / DIN - EN 1.7225 / 42CrMo4
- Chromium-molybdenum tempered steel, supplied both in the perforated bar and in the solid shaft, used in the manufacture of parts of machinery subjected to normal efforts, parts of hydraulic pumps for the oil industry (cross over, pup joints, etc.).
- Its mechanical resistance and yield strength comply with the API N80, L80 or P100 standard, depending on the work requirement.
STEEL ASTM 4140
VER PRODUCTO -
STAINLESS STEELS: STEEL ASTM 420 / DIN - EN 1.4021 / X20Cr13
- High tenacity chromium alloy tempered stainless steel.
- Used in the manufacture of blades for the paper industry, medical instruments, pumps and compressor parts, turbine components for water and crude oil.
STEEL ASTM 420
VER PRODUCTO -
STEEL OF MECHANICAL CONSTRUCTION: STEEL ASTM 4340 / DIN - EN 1.6511 / 36CrNiMo4
- Hardened steel alloyed to chromium, nickel, molybdenum, where high resistance is necessary to avoid breakage and toughness. For the construction of heavy machinery parts, pump shafts, pinions, industrial machinery.
STEEL ASTM 4340
VER PRODUCTO -
COLD WORK STEELS: Astm D2 / DIN STEEL - EN 1.2379 / X153CrMo12
- Tool grade steel, chromium - moly - vanadium alloy, with high dimensional stability and excellent toughness.
- For the manufacture of foil cutting dies up until 5 mm, blades for cutting wood, metal, plastic, paper, and cardboard.
- Rollers for cold forming, tools for pressing ceramics and pharmaceuticals, measuring instruments, small plastic molds where high resistance to wear is required.
STEEL ASTM D2
Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus.VER PRODUCTOLorem ipsum dolor sit amet, consectetuer adipiscing elit. Aenean commodo ligula eget dolor. Aenean massa. Cum sociis natoque penatibus et magnis dis parturient montes, nascetur ridiculus mus.
-
COLD WORK STEELS: ASTM D3 / DIN STEEL - EN 1.2080 / X210Cr12
- Cold work steel with high carbon and chromium content, high dimensional stability in heat treatment and high resistance to wear.
- Applicable for the manufacture of tools for cold work such as punches and arrays for all types of sheet cutting, tools for abrasive works, manufacture of cold forming rollers, tools for pressing ceramic and pharmaceutical materials.
STEEL ASTM D3
VER PRODUCTO -
STEEL FOR HOT WORK: STEEL ASTM H10 / DIN - EN 1.2365 / 32CrMoV12-28
- Excellent hot toughness tool grade steel
- Resistant to heating cracking
- High impact resistance.
- It can be cooled with water.
- Used in the manufacture of molds and dies for the transformation of light and heavy metals, blades for hot cutting.
STEEL ASTM H10
ACEROS PARA TRABAJO EN CALIENTE: ACERO ASTM H10 / DIN - EN 1.2365 / 32CrMoV12-28VER PRODUCTOACEROS PARA TRABAJO EN CALIENTE: ACERO ASTM H10 / DIN – EN 1.2365 / 32CrMoV12-28
-
COLD WORK STEELS: ASTM O1 / DIN STEEL - EN 1.2510 / 100MnCrW4
- High toughness chromium - tungsten alloy tool grade steel.
- For the manufacture of foil cutting dies up until 8 mm, blades for cutting wood, metal, plastic, paper and cardboard, plastic molds. Forming rollers.
STEEL ASTM O1
asdasdasdVER PRODUCTOasdasdasd
-
MECHANICAL CONSTRUCTION STEELS: SAE 1045 STEEL
- Unalloyed steel and medium carbon content, it can be heat treated reaching hardnesses of up to 58 HCR.
- Useful for the manufacture of bolts, keys, pieces and machine parts, for medium strength automotive application.
STEEL SAE 1045
VER PRODUCTO -
STEEL FOR HOT WORK: STEEL ASTM H13 / DIN - EN 1.2344 / X40CrMoV5-1
- Chromium-molybdenum-vanadium steel for hot work, excellent toughness, and ductility, with high resistance to hot wear, adequate resistance to heating cracks.
- Admits water cooling, in addition good deep of quenching properties. Such as tools that work in hot in the transformation of light metals, pipe matrices, profiles, tubular bars, blades for hot cuts, tools for the manufacture of nuts, screws, rivets etc. Wear resistant parts with options for nitriding. Supply hardness between 170 and 180 HB.
TEEL ASTM H13
Acero al cromo-molibdeno-vanadio para trabajo en caliente, de excelente tenacidad y ductilidad, con alta resistencia al desgaste en caliente, adecuada resistencia a grietas por calentamiento. Admite refrigeración con agua, además de buenas propiedades de temple en profundo. Tales como herramientas que trabajan en caliente en la transformación de metales livianos, como matrices de tuberías, perfilería, barras, cuchillas para cortes en caliente, herramientas para la fabricación de tuercas, tornillos, remaches etc. Piezas resistentes al desgaste con opciones para el nitrurado. Dureza de suministro entre 170 y 180 HB.VER PRODUCTOAcero al cromo-molibdeno-vanadio para trabajo en caliente, de excelente tenacidad y ductilidad, con alta
resistencia al desgaste en caliente, adecuada resistencia a grietas por calentamiento.
Admite refrigeración con agua, además de buenas propiedades de temple en profundo. Tales como herramientas que trabajan en caliente en la transformación de metales livianos, como matrices de tuberías, perfilería, barras, cuchillas para cortes en caliente, herramientas para la fabricación de tuercas, tornillos, remaches etc. Piezas resistentes al desgaste con opciones para el nitrurado. Dureza de suministro entre 170 y 180 HB.
